Buyer guides for mill rolls and copper moulds
Practical notes for roll shop, caster and purchasing teams: how to choose grades, tapers and coatings, what to put in an RFQ, and how to source outside China.
Copper mould tube taper: how to choose single, multi or parabolic taper
How to choose the taper of a copper mould tube (copper mold tube) for billet casting — single, multi and parabolic taper, and how steel grade and casting speed change the choice.
Read →Copper mould plates: Cu-Cr-Zr vs Cu-Ag, and which coating to choose
A buyer guide to copper mould plates (copper mold plates) for slab and beam blank casters: Cu-Cr-Zr vs Cu-Ag, nickel and Ni-Co coatings, and when to refurbish instead of buying new.
Read →HSS rolls vs high chrome and indefinite chill rolls in bar and rebar mills
When do HSS rolls (high speed steel rolls) pay back in bar, rebar and rod mills? A comparison with high chrome and indefinite chill cast iron rolls — wear, cracks, cooling and cost per ton.
Read →Tungsten carbide roll rings: choosing the grade and getting more tons per groove
A practical guide to tungsten carbide roll rings for wire rod and rebar mills — binder type and content, choosing grades by stand position, cooling water, regrinding and preventing cracks.
Read →Mill roll RFQ checklist: what to send for fast, accurate quotes
What a steel mill should include in a mill roll RFQ — drawing, OD × barrel × total length, grade, hardness, stand position and quantities — to get comparable quotes quickly.
Read →Non-China sourcing for mill rolls and copper moulds: what US mills should check
US steel mills moving roll and copper mould spend away from China: what to check in a new supplier — grades, testing, documents, logistics and who holds the contract.
Read →Products
Copper mould tubes
Copper mould tubes for continuous casting of billets and blooms — Cu-Ag, Cu-DHP and Cu-Cr-Zr, single and multi taper, hard chrome or Ni-Co coated,…
View →Copper mould plates
Copper mould plates for slab, thin slab and beam blank casters — Cu-Cr-Zr and Cu-Ag broad and narrow faces, Ni and Ni-Co coatings, made to drawing,…
View →Mill rolls
Rolling mill rolls for bar, rebar, wire rod, section and seamless tube mills: adamite, pearlitic, indefinite chill, high chrome, cast steel, HSS and…
View →HSS rolls
Centrifugally cast HSS rolls and high speed steel roll rings for intermediate and finishing stands of bar, rebar and wire rod mills — typically 2–4×…
View →Tungsten carbide rolls
Tungsten carbide roll rings (cemented carbide rolls) for no-twist wire rod blocks, reducing and sizing blocks, pinch rolls and rebar finishing —…
View →